New Products  [more]

Extreme Flight Slick 580 EXP 107" Red/White/Blue
Extreme Flight Slick 580 EXP 107" Red/White/Blue
Rs.126,999.00  Rs.101,599.00
Save: 20% off
Extreme Flight Slick 580 EXP 107" Yellow/Blue
Extreme Flight Slick 580 EXP 107" Yellow/Blue
Rs.126,999.00  Rs.101,599.00
Save: 20% off
3DHS EDGE 540 V2 New Demonstrator 106"
3DHS EDGE 540 V2 New Demonstrator 106"
Rs.139,999.00  Rs.111,999.00
Save: 20% off



Flightline Pro Series 65A SBEC ESC

  • Shipping Weight: 0.2lbs
  • Manufactured by: Flightline

Rs.4,790.00  Rs.3,685.00
Save: 23% off

Add to Cart:
This is a Pro Series high-quality, efficient brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.  

The Pro Series is specifically designed for high performance power applications, usually in conjunction with 4+ HV digital servos. Each incorporates improved thermal management through the use of a modular aluminum and polycarbonate heat sink case which maximizes MOSFET heat dissipation, supports the capacitors and minimizes the 
physical size of the unit. They offer full control through advanced logging and programming capabilities to make best use of advanced features. 

They also provide SBEC current output of 8A continuous /16A surge, and adjustable voltage output of 5V, 6.0V, 7.4V, and 8.4V. Extremely low internal resistance ensures maximum battery amperage throughput to the motor.Additional features include safe power arming along with advanced programmable, data logging system, low voltage cutoff, braking, timing, throttle input range, and more, making this series truly a pro series speed control. 


01.Data logging via PC interface (optional accessory included with program card)
02.Firmware upgradable via PC interface
03.High SBEC current output: 8A continuous, 16A burst
04.Adjustable SBEC voltage up to 8.4v for optimum performance from HV servos
05.Extremely low internal resistance 
06.Smooth and accurate throttle linearity 
07.Power arming protection, over-heat protection, low-voltage protection and lost signal protection
08.Supports high RPM motors
09.Advanced governor mode and soft start
10.Optional programming card & PC USB interface available
Programmable Options:

01.Brake setting (off / soft / mid / hard -- default: off)
02.Battery type: (Ni-XX / LiPo / LiFe -- default: LiPo auto detect)
03.Cut-off voltage threshold (2.8V 50% / 3.0V 60% / 3.2V 65% / No protection -- default: 3.0V 60%)
04.Factory default setup reset
05.Timing settings (auto / 2° / 8° / 15° / 22° / 30° -- default: auto)
06.SBEC Voltage Output (5.0v / 6.0v / 7.4v / 8.4v -- default: 5.0v)
07.Governor mode: (RPM off / 1st Soft Start / 2nd Soft Start / Gov Mode 1 / Gov Mode 2 -- default: RPM off)
08.Motor rotation: (forward / reverse -- default: forward)
09.Start up (Low / Mid / High-- default: 30%)
10.LVC cut-off type: (reduce gradually / cut-off -- default: reduce gradually)


Output: Continuous Current 65A, Burst Current 85A for 10 seconds
Battery: 5-18 NiXX /2-6S LiPo
Weight: 52g
BEC: 5.0V, 6.0V , 7.4V, 8.4V adjustable/8A
Size: 34 x 70 x 11mm

This product was added to our catalog on Monday 20 October, 2014.

Have you seen ...

Manufacturer Info

Who's Online

There currently are 24 guests online.
Copyright © 2017 RCDhamaka. Powered by Zen Cart