The Tiger 60 is designed for beginners and intermediate-level pilots. Its semi-symmetrical wings, make it easy to fly at slow speeds. All wood construction. Factory pre-covered with beautiful color graphics. Pre-glued and pinned hinges on all control surfaces. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.
- Wingspan: 1800mm (70.8in) - Length: 1605mm (63.2 in)- Flying weight: 3700-4200 gr- Wing area: 55.8 dm2- Wing loading: 75g/dm2- Wing type: Naca airfoils- Covering type: V-kote film- Spinner size: Plastic 70mm (included)- Radio: 4 channel minimum (not included) - Servo: 6 standard servo: 2 aileron; 2 elevator; 1 rudder; 1 throttle (not included) - Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included) - Servo mount: 21mm x 42 mm- Propeller: suit with your engine (not included)- Engine: .61-.91 / 2-stroke plug engine; 15cc gas engine (not included) - Motor: brushless out runner (not included)- Gravity CG: 85-90 mm (3.3-3.5 in) Back from the leading edge of the wing, at the fuselage- Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo- Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo- Experience level: Intermediate- Plane type: Low wing sport RECOMMENDED MOTOR AND BATTERY SET UP - Motor: Size .60 (not included)- Lipo cell: 6 cells / 4000 – 5500mAh (not included)- Esc: 60-100A (not included)
- Designed for compatibility with both GP and EP flight- Extremely lightweight laser-cut all-wood construction- All hardware included
This product was added to our catalog on Monday 10 December, 2012.