New Products  [more]

Tmotor AT2820 Motor 880Kv
Tmotor AT2820 Motor 880Kv
Rs.7,249.00  Rs.5,799.00
Save: 20% off
Tmotor AT2826 Motor 900Kv
Tmotor AT2826 Motor 900Kv
Rs.8,749.00  Rs.6,999.00
Save: 20% off
Tmotor AT2814 Motor 1050Kv
Tmotor AT2814 Motor 1050Kv
Rs.5,999.00  Rs.4,799.00
Save: 20% off

Manufacturers

DLE 35RA 35cc Gas Engine

  • Shipping Weight: 4lbs
  • Manufactured by: DLE

Rs.38,999.00  Rs.31,199.00
Save: 20% off

Add to Cart:
This is the DLE 35-RA Gasoline Engine with Electronic Ignition.

FEATURES:
High performance in a compact package
Rear exhaust for the perfect tuned pipe setup
Newly designed piston with re-engineered skirt for less piston
weight resulting in such advantages as awesome throttle response,
more power and longer engine life
Electronic ignition is the no-hassle answer to simpler starts,
higher performance and minimal RF noise
Producing 400 more rpm than the DLE30, the DLE 35-RA comes with
engine standoffs, electronic ignition, spark plug and muffler

INCLUDES:
DLE 35-RA Gasoline Engine
Electronic Ignition
Muffler
DLE CM6 Spark Plug
Four Engine Standoffs with Mounting Hardware
Integrated Choke Rod Guide
Rear-mounted Carb
Instruction Manual

REQUIREMENTS:
Gasoline with at least 87 octane rating
2-cycle oil, mix ratio for this engine is 30 parts gas to one part
oil and must be followed exactly for warranty consideration
and optimum performance
4.8 - 8.4V battery for ignition
(separate receiver style pack can be used) (LiPo & LiFe requires
voltage regulator)
Propeller and field equipment

SPECIFICATIONS:
Displacement: 34.5 cc (2.13 cu in)
Bore: 1.5 in (38.5 mm)
Compression Ratio: 7.6:1
Static Thrust: 9.5kg Pulling Force/100 meters altitude
7.8kg Pulling Force/1,800 meters altitude
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87
Recommended Propellers: 18x10, 19x8, 20x8, 20x10
Weight, engine: 2.06 lb (936 g)
Weight, muffler: 2.61 oz (74 g)
Weight, ignition module: 5.26 oz (147 g)
Output: 4.1 hp @ 8,500 RPM
Carburetor Adjustments;
Low Speed Needle: 1.1 turns out as a starting point, adjust for a
smooth idle and a reliable transition to high throttle
High Speed Needle: 1.5 turns out from closed, adjust needle to peak
RPM, if engine slows or dies at full throttle, the high-speed
mixture is likely too lean
Muffler Dimensions: 3.6 x 2.3 x 1.3" (92 x 58 x 33mm)
Exhaust Outlet Length: 1.9" (48.5mm)
Exhaust Outlet Diameter: 0.63" (16.1mm)
Distance Between Mounting Hole Centers Same Side: 2.1" (54mm)
Distance Between Mounting Hole Centers Opposite Side: 3.1" (80mm)
Height from bottom/Crankcase to top of Cylinder Head: 5.4" (138mm)
Width of Cylinder Head: 2.5" (65mm)
Distance Between Muffler Mounting Hole Centers: 1.6" (40mm)

COMMENTS:
To avoid permanent damage to the electronic ignition system, NEVER
turn your DLE engine over with the system switched on and the plug
not installed.

This product was added to our catalog on Sunday 12 January, 2014.

Manufacturer Info

Who's Online

There currently are 1675 guests online.
Copyright © 2019 RCDhamaka. Powered by RCDhamaka