The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market.
Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor.
With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack.
The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings.
Put it all together and you get one tough high voltage servo at a price that can't be beat.
G2 Digital Circuit
HV Coreless Motor
Dual Ball Bearing Supported Output Shaft
Steel Gear Train (MK first gear)
End Point Adjustments
Data Save / Load
*Select features are only programmable with the HFP-20 field programmer.
HS-7954SH Servo Specifications
Operating Voltage Range (Volts DC): 6.0V ~ 7.4V
Speed (Second @ 60°): 0.15 ~ 0.12
Maximum Torque Range oz. / in.(6.0V/7.4V): 333 ~ 403
Maximum Torque Range kg. / cm.(6.0V/7.4V): 24.0 ~ 29.0
Current Draw at Idle: 9 mA
No Load Operating Current Draw: 240 mA
Stall Current Draw: 3,000 mA
Dead Band Width: 1 µs
Dimensions (Inches): 1.57 x 0.78 x 1.45
Dimensions (Millimeters): 40.0 x 20.0 x 37.0
Weight (Ounces): 2.40
Weight (Gram): 68.0
Circuit Type: G2 Programable Digital
Motor Type: Coreless Metal Brush
Gear Material: Steel
Bearing Type: Dual Ball Bearing
Output Shaft (type / Ømm): Standard 24
Case Material: Plastic / Aluminum
Dust / Water Resistance: Splash Proof
Connector Gauge (AWG) / Strand Count: 22 / 60
This product was added to our catalog on Monday 24 July, 2017.