New Products  [more]

Phoenix Model Waco F5C 15CC Gas/EP ARF 63" - 1:5 3/4
Phoenix Model Waco F5C 15CC Gas/EP ARF 63" - 1:5 3/4
Rs.35,999.00  Rs.28,797.90
Save: 20% off
Phoenix Model Waco 50-61cc Gas/EP ARF 90.5" - 1:4
Phoenix Model Waco 50-61cc Gas/EP ARF 90.5" - 1:4
Rs.66,624.00  Rs.53,299.00
Save: 20% off
Phoenix Model F4U Corsair 50-61CC Gas/EP ARF 85" - 1:5 1/2
Phoenix Model F4U Corsair 50-61CC Gas/EP ARF 85" - 1:5 1/2
Rs.83,311.00  Rs.66,649.00
Save: 20% off

Manufacturers

Hitec D-645MW 32-Bit High Torque Metal Gear Servo

  • Shipping Weight: 1lbs
  • Manufactured by: Hitec

Rs.3,436.00  Rs.2,749.00
Save: 20% off

Sold Out
Product Description
The metal D-645MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec's industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

This is the upgraded version of the HS-5685MH

Features
Programmable PWM Digital Amplifier
32-Bit MCU with 12-Bit ADC Circuitry
4096 Resolution
1M Cycle Long Life Potentiometer
Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
Dual Ball Bearing Supported Output Shaft
25-Tooth Output Spline

Programmable Functions
End Point Adjustments
Direction
Fail Safe
Dead Band
Speed (Slower)
Soft Start Rate
Overload Protection
Data Save / Load
Program Reset

D645MW Servo Specifications
Performance Specifications
Operating Voltage Range (Volts DC) 4.8V ~ 6.0V ~ 7.4V
Speed (Second @ 60°) 0.28 ~ 0.20 ~ 0.17
Maximum Torque Range oz. / in. 115 ~ 158 ~ 180
Maximum Torque Range kg. / cm. 8.3 ~ 11.3 ~ 12.9
Current Draw at Idle 30 mA
No Load Operating Current Draw 500 mA
Stall Current Draw 2,650 mA
Dead Band Width 2 µs

Physical Specifications
Dimensions (Inches) 1.59 x 0.77 x 1.48
Dimensions (Metric) 40.6 x 19.8 x 37.8
Weight (Ounces) 2.11
Weight (Gram) 57.0
Circuit Type 32bit Programable Digital
Motor Type 3 Pole Metal Brush Ferrite
Gear Material Metal
Bearing Type Dual Ball Bearing
Output Shaft (type / Ømm) H25T
Case Material Plastic
Dust / Water Resistance N / A
Connector Gauge (AWG) / Strand Count 22 / 60

This product was added to our catalog on Friday 20 July, 2018.

Manufacturer Info

Who's Online

There currently are 55 guests online.
Copyright © 2018 RCDhamaka. Powered by RCDhamaka