If you are looking for an Almost Ready to Fly R/C model, which is easy to assemble and exciting to fly, the Scanner is for you.This low wing was designed from the start to handle any kind of aerobatic maneuvers. It loops, rolls, flies inverted, and is capable of many more magical moves. It's a flying cocktail of performance. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.
- Wingspan: 1444mm (56.8in) - Length: 1168mm (45.9 in)- Flying weight: 2400-2600 gr- Wing area: 35.2 dm2- Wing loading: 70g/dm2- Wing type: Naca airfoils- Covering type: V-kote film- Spinner size: Plastic 58mm (included)- Radio: 6 channel minimum (not included) - Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included) - Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included) - Servo mount: 21mm x 42 mm- Propeller: suit with your engine (not included)- Engine: .46-.55 / 2-stroke (not included)- - Motor: brushless outrunner 1000-1400 W, 480 KV (not included)- Gravity CG: 70mm (2.7in) Back from the leading edge of the wing, at the fuselage- Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo- Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo- Experience level: Intermediate- Plane type: Low wing sport RECOMMENDED MOTOR AND BATTERY SET UP - Motor: Size .46 (not included)- Lipo cell: 4-6cells / 4000-5000mAh (not included)- Esc: 50-70A (not included)
- Designed for compatibility with both GP and EP flight- Extremely lightweight laser-cut all-wood construction- All hardware included
Current Reviews: 1
This product was added to our catalog on Sunday 09 December, 2012.