New Products  [more]

Hitec HS-125MG Slim Wing
Hitec HS-125MG Slim Wing
Rs.2,811.00  Rs.2,249.00
Save: 20% off
Hitec D-89MW 32-Bit Wide Voltage Micro Metal Gear Servo
Hitec D-89MW 32-Bit Wide Voltage Micro Metal Gear Servo
Rs.5,124.00  Rs.4,099.00
Save: 20% off
Hitec D-950TW 32-Bit, Ultra Torque Titanium Gear Servo
Hitec D-950TW 32-Bit, Ultra Torque Titanium Gear Servo
Rs.11,094.00  Rs.8,875.00
Save: 20% off


Phoenix Classic .61~.91 15cc High Wing Trainer

  • Shipping Weight: 40lbs
  • Manufactured by: Phoenix Model

Rs.14,374.00  Rs.11,499.00
Save: 20% off

Sold Out

This plane is a well designed for .61~.91/15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.
Technical data

- Wingspan: 1730mm (68.1 in)
- Length: 1371mm (53.9 in)
- Flying weight: 3500-4200 gr
- Wing area: 50.5 dm2
- Wing loading: 73g/dm2
- Wing type: Naca airfoils
- Covering type: V-kote film
- Spinner size: Plastic 58mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .61~.91/15cc / 2-stroke (not included)
- Motor: brushless out runner
- Experience level: Beginer
- Plane type: Trainer
- Motor: Rimfire.60 or Equivalent (not included)
- Propeller: 15x6- 15x8 E APC (not included)
- Lipo cell: 6 cells / 4000 – 5500mAh (not included)
- Esc: 60-100A (not included)

This product was added to our catalog on Monday 10 December, 2012.

Manufacturer Info

Who's Online

There currently are 378 guests and 
1 member online.
Copyright © 2020 RCDhamaka. Powered by RCDhamaka