Phoenix Tiger 3 .46~.55

Rs.9,249.00  Rs.7,399.00
Save: 20% off

Introducing

    The Tiger 3, with its semi symmetrical wing section, makes this ARF easy to fly, and will have you well on your way to becoming an expert flyer.All Balsa and Plywood construction. All the hardware are included. You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.

Technical data

- Wingspan: 1600mm (63in) 
- Length: 1360mm (53.5 in)
- Flying weight: 2500-2700 gr
- Wing area: 42.8 dm2
- Wing loading: 60g/dm2
- Wing type: Naca airfoils
- Covering type: V-kote film
- Spinner size: Plastic 58mm (included)
- Radio: 6 channel minimum (not included) 
- Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included) 
- Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included) 
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine (not included)
- Engine: .46-.55 / 2-stroke (not included)
- Motor: brushless outrunner 1000-1400 W, 480 KV (not included)
- Gravity CG: 75-85 mm (2.9-3.3 in) Back from  the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
- Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Low wing sport 
RECOMMENDED MOTOR AND BATTERY SET UP             
- Motor: Size .46 (not included)
- Lipo cell: 6cells / 4000-5000mAh (not included)
- Esc: 50-70A (not included)

Feature

- Designed for compatibility with both GP and EP flight
- Strong Light Weight Construction
- High-quality hardware package included



Add to Cart:

  • Shipping Weight: 30Kgs
  • Manufactured by: Phoenix Model



This product was added to our catalog on Monday 29 July, 2013.

Copyright © 2017 RCDhamaka