Brand: Multiplex

Multiplex Easy Glider Pro with Spinner Kit

₹9,572.88 excl. GST₹11,296.00 Incl. GST
Out of stock
25 people are viewing this right now
    The EasyGlider PRO is based on the popular and proven Easy-Glider and EasyGlider electric.
     
    The model’s flying characteristics are just right for the beginner, although this by no means implies that the more advanced pilot won’t enjoy it – quite the contrary. If you are an expert you will soon discover that the EasyGlider PRO behaves like a much
    bigger model, and its performance is also far better than you might expect.

    FEATURES:
    Construction: Elapor foam to resist damage, white in color
    Wings: Two piece with fiberglass wing joiner
    Spinner: Elapor foam 2.2" (55mm) diameter
    Aileron Control: Dual servo
    Control Surfaces: Elevator, rudder and ailerons
     
    INCLUDES:
    One Multiplex Easy Glider Pro with decal sheet, foam spinner, wing
    joiner, pushrods, hardware and illustrated instruction manual
     
    REQUIREMENTS:
    Radio System: 4-channel with micro receiver
    Servos: Two micro size for elevator & rudder
    Two nano size for ailerons
    Servo Extensions: Two 16" (200mm) for aileron servos
    Y Harness: For aileron servos
    Battery: at least 2100mAh
    Battery Charger: LiPo compatible
    The Brushless Motor Power Pack (MPUG3226) is required
    Building and Field Equipment: Medium viscosity regular (NOT styrofoam
    safe) CA glue and activator, see COMMENTS
     
    SPECIFICATIONS:
    Wingspan: 72" (1828mm)
    Length: 44" (1117.6mm)
    Flying Weight: 28.5oz (810g) with standard power system
    Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system
    Wing Area: FAI approx. 645 sq in (41.67 sq dm)
    Airfoil: Semi symmetrical
    CG (Center of Gravity): 2.7" (70mm) from leading edge at wing root
    measured at fuselage side
    Control Throws-
    Elevator, Up and Down: 0.31-0.39" (8-10mm)
    Rudder, Left and Right: 0.59-0.79" (15-20mm)
    Ailerons, Up: 0.59" (15mm)
    Down: 0.24" (6mm)
    Spoilers-Both Ailerons Up: 0.79" (20mm)
    Spoiler Mixer (Elevator Trim Compensation): 0.16" (4mm)
     
    COMMENTS:
    This model is NOT made of styrofoam and it is not possible to glue
    the material using white or epoxy glue. Medium CA glue used with an
    activator is the only method of gluing recommended by the
    manufacturer.
    Weight 10 kg

    Reviews

    There are no reviews yet.

    Be the first to review “Multiplex Easy Glider Pro with Spinner Kit”

    Your email address will not be published. Required fields are marked *

    Related products