Phoenix Typhoon .46-.55 GP/EP ARF 59.10″

Take the skies by storm!
Perfect for sport pilots everywhere, the Typhoon ARF combines ideal size and the ultimate performance package with a sleek, elegant trim scheme in order to deliver the best aircraft possible. This all wood aircraft is fully capable of delivering a huge range of flight patterns and accommodating a variety of flight styles. All you need to get in the air is a power system, radio system, and servos.

This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly 1/6 scale Typhoon Airplane from Phoenix Model.

FEATURES
Construction: Lightweight laser cut wood
Wing: Two-piece with aluminum joiner tube
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Canopy: Clear, with painted pilot bust
Spinner: Red plastic, 2.3″ (58mm) diameter
Cowl: Painted fiberglass
Canopy: Clear molded plastic with painted pilot figure
Landing Gear: 0.16″ (4mm) diameter prebent wire. 2.5″ (63mm) main
wheels and nose wheels
Engine Mount: Two-piece composite
Motor Mount: Plywood
Fuel Tank: 12oz (360cc) approximate

INCLUDES
ARF Typhoon Airplane with Spinner, Pilot Figure. Landing Gear, 3
Wheels, Decals and Instruction Manual

REQUIREMENTS
Radio: At least 4 channel with 5 standard servos
Receiver Battery: 800-1200mAh NiMH
Glow Power-
Engine: 2-stroke .46-.55 cu in OR 4-stroke .52 cu in
Propeller: to match selected engine
Fuel, glow starter, throttle servo
Electric Power-
Brushless Motor: 1000-1400kV outrunner
ESC: To match selected motor
LiPo Battery: 3-6S
Battery Charger: To match selected battery
Propeller: To match selected motor
Building and field equipment

SPECIFICATIONS
Wingspan: 59.1 in (1500mm)
Length: 53.1″ (1348mm)
Weight: 5.7-6.2 lb (2600-2800 g)
Wing Area: 595 in2 (38.4 dm2)
Wing Loading: 0.2 oz/in2 (70 g/dm2)
Airfoil: NACA
Servo Mount: 0.83 x 1.6″ (21 x 42mm)
Center of Gravity (CG): 4.9″ (125mm) back from the leading edge of
the wing at the fuselage
Control Throws- Low High
Ailerons: 0.31″ (8mm) 10% expo 0.39″ (10mm) 10% expo
Rudder: 0.98″ (25mm) 15% expo 1.57″ (40mm) 15% expo
Elevator: 0.31″ (8mm) 12% expo 0.39″ (10mm) 12% expo