Phoenix Model Tiger Moth .46-.55 GP/EP ARF 55.3″

A fun find for nostalgic fliers!
Sport flying doesn’t get more spectacular – or scale-like – than the 55.3″ span Tiger Moth GP/EP ARF from Phoenix Model! Features include a high-quality, factory-covered trim scheme, a true-to-scale outline, a fiberglass cowl, detailed instrument panels, scale wire rigging and complete hardware.

This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly Tiger Moth Biplane from Phoenix Model.
For intermediate pilots.

FEATURES
Construction: Balsa and ply
Wings: Two-piece with aluminum wing tubes, and semi-symmetrical
Clark-Y airfoil
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Fiberglass
Landing Gear: Main, 2.5″ (63mm) foam wheels, 1″ (25.4mm) tailwheel
Fuel Tank: 14oz (420cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

INCLUDES
ARF Tiger Moth Biplane with Landing Gear, Wheels, Wheel Pants
Cowl, Painted Pilot and Co-Pilot, and Instruction Manual

REQUIREMENTS
Radio: 4-channel minimum
Servo: 5 standard,: 2-aileron; 1-elevator; 1-rudder; 1-throttle (if
using glow engine)
Receiver Battery: 4.8-6V / 800-1200mAh NiMH

For electric power;
Brushless Motor: Rimfire .46-.55
ESC: 50-80A
LiPo Battery: 6S, at least 4000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment

Glow Power;
Engine: .46-.55 cu in 2-stroke, OR .52 cu in 4-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

SPECIFICATIONS
Wingspan: 55.3″ (1404mm)
Length: 44.6″ (1134mm)
Flying Weight: 7.05 – 7.5lbs (3.2 – 3.4 kg)
Wing Area: (58sq dm)
Wing Type: Semi-symmetrical Clark-Y airfoil
Center of Gravity: 3.5″ (90mm) back from the leading
edge of the upper wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.39″ (10mm) 10% expo 0.47″ (12mm) 10% expo
Elevator: 0.31″ (8mm) 12% expo 0.39″ (10mm) 12% expo
Rudder: 0.98″ (25mm) 15% expo 1.57″ (40mm) 15% expo
Wing Bolts: 4.5x30mm