The EasyStar II.
With its superb flying characteristics and safe rear-mounted motor, the new model is the ideal platform for anyone who wants to make a start in the model flying hobby.
As a rugged fun machine it is also a great choice for the more experienced model pilot.
The new EasyStar II incorporates many improvements.
Folding propeller for reduced drag when gliding
Easily detachable tailplane for convenient transport
Prepared for ailerons (everything included in the set, apart from the two servos)
Large internal compartment - plenty of space for a large LiPo flight pack
What the EasyStar II really can do:
The most impressive feature of the EasyStar II is its incredibly long flight times. With the recommended 2200 mAh Ind-Power battery it is possible to rack up forty minutes of flying without thermal assistance. Fit a 5000 mAh Ind-Power battery pack, and you can fly for 100 minutes, which equates to a distance of 75 km.
Construction: Elapor foam on the fuselage, wing and tail section
Wings: Two-piece, foam construction, white in color, may be built
with optional ailerons
Radio Compartment: Foam, sized for high capacity LiPo packs
Landing Gear: No landing gear, model lands on its belly
Hardware: Pushrods and other hardware included
Spinner: White plastic 1.4" (35mm)
Propeller: Plastic, folding pusher type, pro faces the rear of the
Decals: Precut colorful Easy Star II logo decals
Foam fuselage, wings, and tail section, prop, spinner, decals,
instruction manual, and hardware
Radio: Min 4 Channel with Rx or JR XG6
Battery Charger: To match selected LiPo battery
LiPo charge bag and miscellaneous building equipment
Wingspan: 54" (1370mm)
Wing Area: 435 sq in (2810 sq dm)
Wing Loading: 8.28 oz/sq ft (25.27 g/sq dm)
Weight: 25 oz (709 g)
Length: 38.5" (978mm)
Airfoil: Flat bottom, high wing configuration
Center of Gravity: 3.07" (78mm) back from the wing's leading edge
at the fuselage sides.
Elevator: 0.20" (5mm) up, 0.16" (4mm) down
Rudder: Right & Left 0.39" (10mm)
This model is NOT made from polystyrene foam. For this reason, it is
not possible to use white glue or epoxy glue. Use only a medium CA
(CA+) glue and activator. Do not use CA glue designed for polysty-