Phoenix Model P-47 Thunderbolt 30-35cc Gas/EP ARF 79" - 1:6 1/4

Heavy-duty and hard-hitting.
The heavily armed Republic P-47 Thunderbolt was the largest, heaviest, and most expensive fighter aircraft in history to be powered by a single piston engine. Fully loaded, it weighed up to 8 tons! A remarkably accurate recreation, this factory-finished balsa/ply sport-scale version uses slotted flaps to conceal control horns internally. Also included are air retracts, scale cockpit with instrument panel and pilot, scale plastic guns and antenna — and much more. Fly with your preference of glow, gasoline, or brushless electric power.




FEATURES
Experience Level: Intermediate
Plane Type: Scale military
Construction: Balsa and light plywood
Wing: Bolt-on two-piece
Flaps: Slotted to provide function and scale appearance concealing
the control horns internally to maintain scale lines
Covering: High quality self-adhesive
Landing Gear: Heavy duty air retract with CNC machined metal
suspension struts, air valve system, air hose, one-way valve
Cowl: Factory painted
Canopy: Removable for access to battery and radio equipment
Cockpit: Detailed with instrument panel, painted pilot bust
Top Hatch: Removable for easy battery changes and access to radio
gear
Motor Mount: Plywood
Engine Mount:
Fuel Tank: Approximately --oz (--cc)

INCLUDES
Prebuilt and covered Fuselage, Wing and Tail sections, Landing Gear,
scale Hardware Package, Instruction Manual, Instrument Panel,
Pilot, scale Lens, Mirror, Gun and Removable Antenna

REQUIREMENTS
Radio: 8-channel minimum
Servos: 9 standard size (2 aileron; 2 flap; 2 elevator; 1 rudder;
1-air valve, 1-throttle (if using gas engine)
Receiver Battery: 6.0V 2400-2600mAh NiMH
Spinner: Scale type P47 Thunderbolt
Building and field equipment
For Electric Power;
Brushless Motor: Outrunner type, Great Planes ElectriFly RimFire 1.60
recommended
Electronic Speed Control:
LiPo Battery: 12S 5000 - 6000mAh
Propeller: 16x8 - 18x8E
For Glow or Gasoline Power;
Engine: 30-35cc gasoline
Propeller: To match selected engine

SPECIFICATIONS
Wingspan: 79.1" (2011mm)
Length: 68.4" (1737mm)
Flying Weight: (8000 - 8200g)
Wing Area: 1083 sq in (70 sq dm)
Wing Loading: 36oz sq in (110g/sq dm)
Wind Type: NACA airfoils
Pressure for Air Tank Retract: 7 bar (100 psi)
Servo Mount:
Center of Gravity, CG: 5.3" (135mm) back from leading edge of wing at
fuselage side
Control Throws- Low High
Ailerons 0.51" (13mm) 0.59" (15mm)
Elevator 0.47" (12mm) 0.55" (14mm)
Rudder 0.79" (20mm) 0.98" (25mm)
Flaps mid 0.63" (16mm) down landing 0.98" (25mm) down