New Products  [more]

Drone Arm Part A1 10mm Clamp
Drone Arm Part A1 10mm Clamp
Rs.171.00  Rs.137.00
Save: 20% off
Drone Arm Part A1 12mm Clamp
Drone Arm Part A1 12mm Clamp
Rs.171.00  Rs.137.00
Save: 20% off
Landing Gear Part dia 20mm
Landing Gear Part dia 20mm
Rs.1,164.00  Rs.931.00
Save: 20% off


Extreme Flight MXS 83" - Yellow

  • Shipping Weight: 250lbs
  • Manufactured by: EXTREME FLIGHT

Rs.85,699.00  Rs.68,559.00
Save: 20% off

Sold Out
Extreme Flight 76" MXS
The Extreme Flight MXS is loaded with unique features, including first rate hardware, components and thorough instructions to ensure a trouble free assembly and set-up.

Weight saving components are used throughout, such as carbon fiber structural reinforcement, carbon fiber wing and stab mounting tubes, carbon fiber landing gear, titanium pushrods and a carbon fiber tail wheel assembly, all ensuring the lightest, most high performance aircraft possible.

You will notice there is a box built into the bottom of the glow/gas version of the MXS fuselage. This is a pipe tunnel and will accommodate most canister mufflers and tuned pipes sold for the current makes of 30-40cc gas engines.

Designed to use an Electric set up that delivers 3000 Watts on 10S using an APC 22x10 (depending on battery and motor used) and a matching 90 Amp or higher controller.

Jase Dussia wringing out the 76" MXS EXP

Product Information
Wingspan: 76 inches w/o wingtips 83 inches with wingtips
Length: 78 inches
Wing Area: 1206 sq. in. w/o wingtips 1260 sq. in. with wingtips
Weight: 11.5 - 12.5 lbs

Power System
Desert Aircraft DA 35
FlowMaster 12 or 14 oz. fuel tank
EF Fuel Dot

3 inch (76 mm)

Modern computer radio

Qty. 5 full size, metal gear hi-torque servos. MKS HV-1220 recommended.
Qty. 1 throttle servo, MKS HV-1250 recommended.

Servo Arms
Qty. 2 Extreme Flight 1.5" single servo arms (tapped 3mm) for ailerons
Qty. 2 Extreme Flight 2" single servo arms (tapped for 3mm) for elevator
Qty. 1 Extreme Flight 4" double servo arm (tapped for 3mm) for pull-pull rudder

Servo Extensions
Qty. 2 Extreme Flight 20 AWG 12 inch for Ailerons
Qty. 2 Extreme Flight 20 AWG 6 inch for Rx to Ailerons
Qty. 2 Extreme Flight 20 AWG 36 inch for Elevators. 36" Extensions required if stabs are to be removed for transport

This product was added to our catalog on Friday 11 December, 2015.

Manufacturer Info

Who's Online

There currently are 14 guests online.
Copyright © 2023 RCDhamaka. Powered by RCDhamaka