CUAV Air Speed MS4525
Original price was: ₹10,593.22.₹6,864.41Current price is: ₹6,864.41.CUAV Airspeed Sensor (MS4525) with Pitot Tube for V5+, V7
Showing 1–20 of 23 results
CUAV Airspeed Sensor (MS4525) with Pitot Tube for V5+, V7
HV_PM 10-60V XT60 Power Module Feature: Hold more high input voltage: 10v-60v (3s ~ 14s battery) More accurate current and voltage detection: Voltage detection accuracy: + – 0.1v; Current detection accuracy: + – 0.2aA Support higher power port output current: 5A Maximum (detection) current: 60A Function: Provide 5V voltage output and maximum 5A current to…
CUAV NEO 3 Pro GPS Module | GNSS U-BLOX M9N CAN BUS NEO continues the hardware design of NEO V2, upgrade the GNSS module to Ublox NEO M9N, supports Beidou, Galileo, Glonas and GPS receive at the same time, and the horizontal positioning accuracy is up to 0.7M. Integrated with safety switch, buzzer, RGB light.
CUAV SKYE Airspeed Sensor Dual Temperature Control System Intelligent De-icing Rainproof Structure DroneCAN Protocol Specification Processor STM32F4 Protocol DroneCAN Pitot tube temperature control type Resistance heating Airspeed sensor MS5525 Sensor performance Airspeed measurement range ±500km/h Airspeed accuracy ±0.69Pa Total Error Band ±2.5%FS Humidity measurement range 0-100% Physical characteristics Pitot tube heating power 35W DC IN…
V5+ is an advanced autopilot manufactured by CUAV. The board is based on the Pixhawk FMUv5 design standard, the external interface uses the Pixhawk standard pinouts, and the modular design allows the users to customize their own carrier board. The autopilot is compatible with both PX4 and ArduPilot firmware. V5+ is ideal for academic research…
CUAV V6X Features: 1–H7 Double-precision floating-point processor 2–High-performance ARM M3 coprocessor 3–Low noise Car-grade IMUs. 4–Triple redundant IMUs and dual redundant barometer designs. 5–Car-grade RM3100 magnetic compass 6–New built-in shock absorption design Pixhawk V6X Specification Main Specification Hardware Standard Pixhawk FMUv6x Standard DS-010 Pixhawk AutoPilot Bus Standard DS-012 Pixhawk AutoPilot V6X Standard Processor STM32H753IIK6 32-bit…
X7+ autopilot uses STM32H743 series processors CPU, Cortex-M7 core (with double precision Floating-Point Unit). It makes operating frequency increase to 480Mhz, 2MB Flash,1MB RAM,Meet the higher computing needs of flight controllers Compared with the STM32F7 product line, the dynamic power consumption efficiency is doubled. Specifications Main FMU Processor: STM32H743 480Hz Frequency On-board sensors: Accelerometer/Gyroscope: ICM-42688-P(X7:BMI088)…
Hobbywing’s XRotor 60A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 60A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running. The 60A Micro 4-in-1 ESC comes loaded with the latest 32bit tech, as well as…
1. 200A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U/ACS770-200U 2. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed 3. This Sensor board connects directly to any SVMFG BEC. 4. It Current Sensor connects to our SVMFG SENSOR…
1. 50A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U 2. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed 3. This Sensor board connects directly to any SVMFG BEC 4. It Current Sensor connects to our SVMFG SENSOR…
SVMFG HEXA PDB – Power Distribution Board Data Sheet 1. Size: 82.43mm x 80.00mm 2. Thickness : 1.6mm 3. Layers: 6 Thick Copper 4. Continuous Current: 200A 5. Burst: 300A (10s) 6. PCB: IPC Class II 7. Connectors: 10 nos XT60 Female and Tab Terminal: 2 nos 8. PDB Weight with connector and terminal soldered:…
2-6s BEC with 1 x 5.35V Output: 5.35V/3A Inclusive LDO power supply (+5.00V +/- 0.03V) for the current sensor board as well as sensor hub duo and output connector with Molex click-mate 4P Input wrong polarity protection, as well as input and output capacitors to prevent burn out of the UBEC from voltage spikes Blue…
2-6s BEC with 2x 5.35V Output: 5.35V/3A Inclusive LDO power supply (+5.00V +/- 0.03V) for the current sensor board as well as sensor hub duo and output connector with Molex click-mate 4P Input wrong polarity protection, as well as input and output capacitors to prevent burn out of the UBEC from voltage spikes Blue power…
2-6s BEC with 2x 5.30V / 1x 5.0V / 3A Output: 5.35V/3A Inclusive LDO power supply (+5.00V +/- 0.03V) for the current sensor boards as well as sensor hub duo and output connector with Molex click-mate 4P Input wrong polarity protection, as well as input and output capacitors to prevent burn out of the UBEC…
End of content
End of content
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now