Product on sale

Phoenix Model SBACH 342 1.20/22cc

₹16,778.81 excl. GST₹19,799.00 Incl. GST
Out of stock
29 people are viewing this right now

    Get back in the air with the Sbach
    Based on the XtremeAir Sbach 342, the Phoenix Model version of this performance plane lives up to the original with maneuverability and control that is every bit as thrilling as the original! This model is a 3D masterpiece built from balsa and plywood and ready for your favorite nitro engine and radio system.

    This is the Radio Controlled, 1.20 Glow or Electric Powered 1/4 scale
    Almost Ready to Fly Sbach 342 Scale Aerobatic Monoplane from Phoenix Model.
    Recommended for intermediate level aerobatic fliers.

    FEATURES
    Construction: Laser cut balsa and ply
    Covering: High-quality film covering
    Wing: Two-piece
    Aileron Control: Dual servo
    Cowl: Factory painted fiberglass
    Canopy: Clear, with painted pilot bust
    Landing Gear: Prebent aluminum main gear, spring wire for tail gear
    Spinner: Red plastic 2-3/4″ (70mm)
    I
    NCLUDES
    ARF Sbach 342 Aerobatic Airplane with Wheels, Spinner, Cowl, Pilot
    Bust, Fuel Tank, Canopy and Instruction Manual

    REQUIREMENTS
    Radio: 4-channel minimum
    Servos: Six standard, 2-aileron, 2-elevator, 1-rudder, 1-throttle
    (if using glow engine)
    Receiver Battery: 4.8 – 6.0V (1200-2000mAh)

    For Glow Power;
    Engine: 1.20 cu in (19.6cc) 2-stroke OR 1.20 cu in (19.6cc) 4-stroke
    Glow Fuel, Glow Starter, Prop, Building and Field Equipment

    For Electric Power;
    Brushless Outrunner Motor: .120 Rimfire
    ESC: 80-100A to match selected motor
    LiPo Battery: 6-12S at least 4000-5500mAh
    Battery Charger: To match selected battery
    Prop, Building and Field Equipment

    SPECIFICATIONS
    Wingspan: 65.5″ (1663mm)
    Length: 64.5″ (1638mm)
    Flying Weight: 10.36 – 11.4 lbs (4700 – 5200 g)
    Airfoil: Naca
    Wing Area: 868 sq in (56 sq dm)
    Wing Loading: 27.85 oz/sq ft (85 g/sq dm)
    Center of Gravity (CG): 4.5″ (115mm) back from leading edge of wing
    at fuselage sides
    Control Throws- Low Rate High Rate
    Elevator: Up & Down 0.47″ (12mm) 12% expo 0.59″(15mm) 12% expo
    Rudder: Right to Left 1.18″ (30mm) 15% expo 1.8″ (45mm) 15% expo
    Ailerons: Up & Down 0.47″ (12mm) 10% expo 0.59″(15mm) 10% expo

    Weight 60 kg

    Reviews

    There are no reviews yet.

    Be the first to review “Phoenix Model SBACH 342 1.20/22cc”

    Your email address will not be published. Required fields are marked *