Phoenix Model Stuka Ju 87 20CC Gas/EP ARF 75.2″ – 1:4

A high-flying scale ace!
Impressively sized with a 75.2″ wingspan, the Phoenix Model Stuka Ju 87 ARF gives you the option to fly with glow, gasoline or electric power. Features a two-piece wing, high-quality balsa/ply construction, a full-depth cockpit and instrument panel, pilot figures, spinner and a complete hardware package.

This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Stuka Ju87 1.20/20cc Scale Airplane.
For Intermediate Modeler/Fliers.

FEATURES:
Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Flap Control: Dual servo per wing (four total)
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
Canopy: Dual design, clear with painted-on frame lines
Landing Gear: Aluminum shock absorbing strut type, prebent spring
wire tail gear
Wheels: Two 4.25″ (108mm) rubber main, one 1″ (25mm) tail wheel
Wheel Pants: Painted plastic
Fuel Tank w/pre-assembled stopper, approximately 24oz (720cc)
Spinner: Plastic construction black in color, 3.5″ (90mm) diameter
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs

INCLUDES
Wheels, Fuel Tank, Decals, Spinner, Instrument Panel,
Pilot, Instruction Manual and
Hardware

REQUIREMENTS
For Glow Operation;
Engine: 1.20 2-stroke, or 1.40 4-stroke
For Gasoline Operation;
Engine: 20cc
For Electric Operation;
Brushless Motor: 1600-2200W
ESC: 120-160A
LiPo Battery: 5S-6S, 5500 – 6000mAh
Radio: 6-channel
Servos: Nine standard high-torque 2-aileron; 2-elevator; 4-flap
1-rudder (1-throttle if using gasoline or glow engine)
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Misc. Items: 1/4″ foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

SPECIFICATIONS
Wingspan: 75.2″ (1910mm)
Weight: 10.8 – 11.9lb (4.9 – 5.4kg)
Length: 60″ (1522mm)
Wing Area: 936 sq in (60.4 sq dm)
Wing Loading: 26.54 oz sq/in (81 g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6″ (21 x 42mm)
Center of Gravity: 4.4″ (111mm) Back from the wing’s leading edge
measured at the fuselage
Control Throws- Low Rate High Rate
Elevator: 0.43″ (11mm) 12% expo 0.51″ (13mm) 10% expo
Rudder: 1.2″ (30mm) 15% expo 1.8″ (45mm) 15% expo
Ailerons: 0.43″ (11mm) 10% expo 0.51″ (13mm) 10% expo

Click Here to Download Manual