Product on sale
Brand: PowerBox Systems

PowerBox Competition

₹22,511.85 excl. GST₹26,563.98 Incl. GST
Out of stock
20 people are viewing this right now
    The PowerBox Competition 2010 is the logical development of the original Competition 
    power supply system with regulated output voltage, which was first introduced back in 2003. 
    The range of applications for this backer is virtually limitless due to the large number of integral features.
    Features:
    01.Servo-Match function: servo centre, end-points and reverse for 4 channels and 8 servos.
    02.Graphic OLED screen with 128 x 64 pixels.
    03.Extremely user-friendly menu-based programming using the SensorSwitch.
    04.12 channels.
    05.Signal amplification and interference suppression for all 18 outputs.
    06.Variable frame rate, range 9ms – 21ms.
    07.16-bit processor for fast, high-resolution signal processing.
    08.Double-regulated output voltages for receivers and servos.
    09.Regulated voltage with selection facility, 5.9V or 7.4V.
    10.Connection facilities for Spektrum, HoTT and Multiplex MSB downlink bus systems.
    11.Direct transmission of battery voltage and capacity to the transmitter.
    12.Separate voltage and capacity display for each battery.
    13.Minimum value memory alerts the user to voltage collapses.
    14.Large-area heat-sinks for high regulator performance.
    15.Regulator monitoring, regulator error indicator.
    16.Support for three battery types: LiPo, NiMH / NiCd, LiFePo.
    17.Suppression of any servo feedback currents which may occur.
    18.Updateable with PowerBox Systems USB Interface connectors.
    Technical Data:
    Operating voltage – 4.0V – 9.0V
    Power supply – 2S LiPo, 2S LiFePo, 5S NiCd/NiMH
    Current drain Power-on state – 130mA
    Current drain Standby – 15µA
    Maximum load current – Peak 2x20A
    Drop-out voltage – 0.3V
    Output voltage – 5.9V and/or 7.4V regulated
    Signal input – PWM
    Channels – 12
    Servo sockets – 21
    Programmable servo outputs – 4 channels, 8 servos
    Servo signal resolution – 0.5µs
    Signal frame rate – 9ms, 12ms, 15ms, 18ms, 21ms
    Screen – OLED 128 x 64 pixels, graphic
    Supported telemetry systems – Spektrum, HoTT, M-Link
    Dimensions – 110 x 72 x 24 mm
    Weight – 115g
    Weight Sensor Switch – 15g
    Temperature range – -30°C to +75°C
    Product description:
    The PowerBox Competition 2010 is the logical development of the original Competition power supply system with regulated output voltage, which was first introduced back in 2003. 
    The range of applications for this backer is virtually limitless due to the large number of integral features.
    The Competition supports twelve channels remotely accessed from the receiver, four of which are equipped with a servo-match function. 
    This makes it ideal for aerobatic models in the 25% to 35% class as well as for jets.
    The purpose of servo-matching is to adjust the centre point, end-points and direction of rotation very accurately for each servo. 
    This means that multiple servos connected mechanically to a single control surface can be fine-tuned to operate exactly in parallel, preventing the servos working against each other. 
    They are able to develop their full power, and consume less current. 
    Servo-matching can also extend the effective life of your servos enormously.
    However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. 
    As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition. 
    This saves channels, and in many cases makes the transmitter programming procedure much easier.
    Weight 0.5 kg

    Reviews

    There are no reviews yet.

    Be the first to review “PowerBox Competition”

    Your email address will not be published. Required fields are marked *

    Related products