Showing 1041–1060 of 1844 results
XBus compatible Diversity 8channel DMSS receiver w/Hybrid output port available Selectable Xbus/PWM port output on AUX3 Easy BIND system (No binding plug is needed) DMSS 2.4GHz 8ch Add Receiver “RG812BX-B” Use with RG812BX (R8A)(1ch to 8ch) you will be able to use 16ch Dimensions : 14.5 x 25.5 x 47.5mm Weight : 15g Receiving System…
This is the JR Rx Charge Cord. Banana plugs on one end and universal connector on opposite end Plug Directly Into Charging Outlets (no soldering, crimping, or splicing plugs onto wires). Will Work with Other Brands of Chargers or Voltmeters Using Banana Plug Outputs.
SXD serial bus adapter allows this system to be compatible with most all Quad/SXD serial bus adapter allows this system to be compatible with most all Quad/Drone D, S, and other Serial Bus capable flight controllers. Just use the SXD serial adapter to connect your JR XBus equipped receiver and your flight controller, and you…
This is the JR Unassembled Male Connector Set. Allows modeler to make their own servo leads and extensions Gold plated pins for high conductivity and reliability fit wire sizes from 20 – 30 AWG. Comes in a pack of 2 connectors with 6 pins.
This is the JR Unassembled Female Connector Set. Allows modeler to make their own servo leads and extensions Gold plated pins for high conductivity and reliability fit wire sizes from 20 – 30 AWG. Comes in a pack of 2 connectors with 6 pins.
Â
Overview: The JR TLS1-PWR Telemetry Power Sensor can provide you with vital in-flight information about your model’s electronics and power system. This telemetry sensor is compatible with the JR XG series 2.4GHz DMSS transmitters (XG11, XG8, XG7 and XG6). By simultaneously measuring the voltage and current, the power output and total power consumption can be…
Overview: The JR TLS1-ROT Telemetry Rotation Sensor can provide you with vital in-flight information about your model. This telemetry sensor is compatible with the JR XG series 2.4GHz DMSS transmitters (XG11, XG8, XG7 and XG6). The TLS1-ROT can accurately measure the RPM of your propeller, main rotor blades or any other rotating part on your…
Airspeed Sensor For DMSS 2.4GHz Specifications: Detection system] Air pressure conversion Detection range] 30 – 600km/h Operating voltage] 4.0V – 8.5V Conversion compatibility: XG14/XG14E, with firmware version 0001-0005. XG11/XG11MV, with firmware version 0002-0012. XG8, with firmware version 0001-0016. Note: All other XG series transmitters (except the XG7) will soon be compatible once new firmware updates…
Overview: The JR TLS1-TMP Telemetry Temperature Sensor can provide you with vital in-flight information about your model. This telemetry sensor is compatible with the JR XG series 2.4GHz DMSS transmitters (XG11, XG8, XG7 and XG6). The TLS1-TMP can accurately measure temperature of any component by contact. Specification: Temperature Measurement Range: 10°C~90°C  (50°F~194°F)
Overview RPM Sensor, Optical TLS2-ROT DMSS JR® Dual Modulation Spectrum System (DMSS) 2.4GHz protocol offers a secure radio link that combines DSSS and FHSS capabilities into a wide-band transmission system that includes high-speed response and high resistance against RF noise. Another outstanding benefit is the JR bi-directional DMSS communication system and the real-time telemetry information…
End of content
End of content
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now
